Property Value Unit Testing Density 200~220 Kg/m3 ASTM-D-3575 Hardness 58~60 (Shore A) ASTM-D-2240 Tensile strength at break 22~28 Kg/cm2 ASTM-D-412 Elongation of break 230~250 % 500 mm/min Split tear 3~3.5 Kg/cm ASTM-D-3574 Compression set 50C/6h 45~50 % ASTM-D-395 Synamic compression set 11~13 % Resiliency 35 % ASTM-D-2632 Mould release good   Skin quality smooth

Stations temperature: 178~188 c Speed steps for injections: 20~30 max flow %(due to mould size) Injection pressure: 80~90 bar (Due to mould size) Cyele time 400~480 sec.(Due to mould size) Expansion ratio: 1.65 Close time of mould: 0~5 sec. Open time of mould: 5~20 sec.

Test item Specification standard Test result Hardness ASTM D-2240 65°±3° Tensile strength ASTM D-412 20~25 kgf/cm2 Elongation ASTM D-412 300 % Tear strength ASTM D-624 15 kgf/cm2 Specific gravity ASTM D-297 0.2~0.25 g/cc Compression set ASTM D-395 60 % Akron abrasion CNS 734 6LB 3000 cyclex 15 angle 0.3 c.c

Test item Specification standard Test result Hardness ASTM D-2240 55°±5° Tensile strength ASTM D-412 18±5% kgf/cm2 Elongation ASTM D-412 320±5% Tear strength ASTM D-624 9±5% kgf/cm2 Specific gravity ASTM D-297 0.2~0.23 g/cc Compression set ASTM D-395 60±5 %

Test item Specification standard Test result Hardness ASTM D-2240 50~60±3 Tensile strength ASTM D-412 16~20±5% kgf/cm Elongation ASTM D-412 250~330±5% Tear strength ASTM D-624 10±5% kgf/cm Specific gravity ASTM D-297 0.22±5% g/cm Compression set ASTM D-395 50~55±5 %

Test item Specification standard Test result Hardness ASTM D-2240 55±2 Tensile strength ASTM D-412 22 (with skin) Elongation ASTM D-412 270% Tear strength ASTM D-624 10 kg/cm Specific gravity ASTM D-297 0.22 g/cc Compression set ASTM D-395 skin: 55~60 % DETERMINATION OR COMMENTS: 1.This material maily using in slipper & mid-sole. 2.For slipper the hardness popular using in hardness 55±2 shore. 3.Slipper, Sandal, Boots and mid-sole & out-sole  of sportting shoe.